Available in down, side and top discharge models

	Down discharge systems are usually roof mounted, and suitable for both ducted and plenum applications. They represent a very cost effective solution to a cooling problem. A 550mm x 550mm dropper duct serves as both mounting bracket and air distributor.
	Top discharge units suit applications where convenient access to a floor mounted air conditioning unit is important, or where the installation requires it.
	Side discharge systems may be either wall or floor mounted and are suitable for discharging directly into a wall register. They may also be ducted into a ceiling cavity, depending on the application. Sound attenuation may be required for a single wall register application.
Wall Controller Simple to use Six speeds Off-Fan-Cool modes

Specifications for Down and Top discharge models

Model	Down Discharge Top Discharge	D095 T095	D125 T125	D160 T160	D195 T195	D230 T230	D255 T255
Motor - Variable Speed	Voltage	220-240	220-240	220-240	220-240	220-240	220-240
	Watts	600	600	750	1000	1000	1000
	Amp Draw low/high	2.65/3.6	2.65/3.6	2.7/3.85	2.9/5.6	2.9/5.6	2.9/5.6
	RPM low/high	600-1370	600-1370	600-1350	850-1410	850-1410	850-1410
Fan	Auswing II 35o	x	x
	Auswing II 40o			x
	Powerflow Fixed Pitch				x	x	x
Pump - Quietflo	35 LPM	x	x	x	x	x	x
Filter Media (Celdek)	Number of Pads	4	4	4	4	4	4
	Size mm	830x370	830x460	830x460	830x535	830x650	830x770
	Thickness mm	75	75	100	100	100	100
Cooling Capacity m3 (Comcool Zone 2)		228	300	384	468	552	612
Design Air Flow	m3/hr	7 500	10 000	12 500	15 000	18 000	19 500
	cfm	4 400	5 900	7 400	8 900	10 700	11 600
	Lit/sec	2 100	2 800	3 500	4 200	5 000	5 400
Depth/Width mm		1090x1090	1090x1090	1090x1090	1090x1090	1090x1090	1090x1090
Height mm		570	660	660	735	850	970
Height above dropper mm		310	400	400	475	590	710
Operating mass kg		82	84.5	86	92.5	94	97.5
Dropper Duct Size		550x550	550x550	550x550	550x550	550x550	550x550

Specifications for S240 Side discharge unit
S100 information here

Model		S240
Motor - Variable Speed	Voltage	220-240
	Watts	1000
	Amp Draw low/high	2.9/5.6
	RPM low/high	850-1410
Fan	Powerflow Fixed Pitch	x
Pump - Quietflo	35 LPM	x
Filter Media - Celdek Flute size 7050/45	Number of Pads	3
	Size mm	3x 830Hx950W
	Thickness mm	100
Cooling Capacity m3 (Comcool Zone 2)		576
Design Air Flow	m3/hr	18 500
	cfm	11 000
	Lit/sec	5 100
Depth/Width mm		1090x1090
Height mm		1320
Operating mass kg		92

Actual installation may vary from illustrations.
Air Group Australia is proud to pursue a policy of continuous development and therefore reserves the right to make product changes without prior notice.